6/6
AH Series Stadium Subwoofer
AHSUB15S
Specifications
MODEL | POWER RATING RMS | FREQUENCY | SOUND LEVEL | DISPERSION | IMPEDANCE | DIMENSIONS | WEIGHT | |
|
| RES. ±5dB | RP/1M | 1W/1M |
|
|
|
|
|
|
|
|
|
|
| ||
AHSUB15S | 250 Watts RMS | 55Hz to 120Hz | 127dB | 103dB | Omni | 8Ω | 30.56"H (776mm) | 181 lbs (82.1kg) |
|
|
|
|
|
|
| 30"W (762mm) |
|
|
|
|
|
|
|
| 28.1"D (714mm) |
|
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004339 RevA 5/12
Troubleshooting
PROBLEM | POSSIBLE CAUSE | REMEDY |
There is no sound | Power off. Equipment setting is wrong. | Assure that power is applied to all equipment in system. Check that routing (input/ |
| Volume set too low. | output) controls are set correctly. Check that volume level is above minimum. |
| Loose connection. | Check system from start to finish for crossed wires, loose connection, etc. On the AH |
|
| location check for correct connection. |
Low sound level | Setting/volume control is set too low. | Check volume levels or amplifiers and related equipment (equalizer). Check that |
| Connection is shorted or bad. | connections aren't partially shorted/corroded. |
Sound cuts in and out | System overload/oscillation intermittent | Check for overload condition or bad connection. |
| connection. |
|
Distortion at increased levels | Amplifier/speaker overdriven. | Check that power to speaker isn't over limits. Check that amplifier isn't overdriven. |
|
| Reduce power to amplifier slightly. |
Call Atlas Sound tech support at
1601 JACK MCKAY BLVD. | TELEPHONE: (800) | AtlasSound.com | |
ENNIS, TEXAS 75119 U.S.A. | FAX (800) | ||
|