©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004339 RevA 5/12
3/6
AH Series Stadium Subwoofer
AHSUB15S
Ground Installation
General considerations and hardware recommendations
Excellent results may be achieved by mounting the AHSUB15S under bleacher seating. Electronic delay is suggested to approximate time alignment of full range speakers with subwoofer(s) to the listener locations. Use AHSUBSTAND for this mounting configuration.
Overhead Suspension Installation
Remember that wind will add considerable torque to the point of attachment. The mounting surface the speaker is being attached to should be able to handle five or more times the weight of the AH speaker (7x recommended for locations subject to high wind forces).
The installer must ensure that the surface is capable of safely and securely supporting the load. The hardware employed must be safely and securely attached both to the loudspeaker and the surface in question. A general rule for soft surface installations (wood beams) is to multiply the corresponding working load limit by 75%: the result will be an approximate working load strength.
CAUTION: The AHSUB15S weighs 181 pounds (82.1kg). A fall from almost any height could result in serious injury or death. Assure that the speaker is firmly mounted to an object that can handle the weight. For on ground installation a 36" square 2" thick (minimum) concrete pad is suggested. If this pad is to be poured concrete, rebar anchors are suggested to allow chain or cable securing of the AHSUB15S for theft resistance.
1601 JACK MCKAY BLVD. | TELEPHONE: (800) | AtlasSound.com | |
ENNIS, TEXAS 75119 U.S.A. | FAX (800) | ||
|