Toshiba 960-809 manual Installing the keyboard

4.10 Keyboard 4 Replacement Procedures

Installing the keyboard

The following describes the procedure for installing the keyboard. (See Figure 4-14 to 4-17.)

1.Place the keyboard face down on the palm rest.

2.Connect the keyboard cable to the connector CN3240 on the system board.

CAUTION: Extra portion of the keyboard cable must be put under the palm rest.

3.Install the keyboard cover and secure it with the following screw. (Insert the guide of the keyboard cover first)

∙ M2.5×3.0C S-THIN HEAD screw ×1

4.Turn the keyboard face up and insert the four guides of the keyboard into the four slits. Set the keyboard while pushing the latch. Make sure the guide of the keyboard is under the latch.

5.Secure the keyboard with the following screws.

∙ M2.0×3.0C S-THIN HEAD screw ×2

6. Install the keyboard holder while engaging the latches.

PORTÉGÉ M780 Maintenance Manual (960-809) [CONFIDENTIAL] 4-31