d)Unlatch the Spider Stopper Guards and remove. Figure 13.
g)Lift and twist the burner assembly slightly, to separate the crossover tube from the burners. Figure 16. Remove the burners from the cooking box.
Crossover tube
Figure 13
e)Remove the manifold bracket and unscrew the two wing nuts that hold the manifold to the cooking box. Pull the manifold and valve assembly out of the burners and carefully set it down. Figure 14.
View from behind cooking box
Wing nuts
Figure 14
f)Slide the burner assembly out from under the guide screw and washer in the corners of the cooking box. Figure 15.
Guide screw
Figure 15
Figure 16
h) To reinstall the burners, reverse steps c) through g).
mCAUTION: The burner openings must be positioned properly over the valve orifices. Figure 17a.
Check proper assembly before fastening manifold in place. Figure 17b.
(a)
Valve
Burner
(b)
Figure 17
31
