4.20 Fan/Heat sink/CPU

4 Replacement Procedures

4.20 Fan/Heat sink/CPU

Removing the Fan/Heat sink/CPU

The following describes the procedure for removing the fan/heat sink/CPU. (See Figure 4-31 to 4-35.)

1.Disconnect the fan cable from the connector CN3380 on the system board.

2.Remove the following screws and heat sink.

∙ M2.0×4.0B

BIND screw

×4

3. Remove the fan hood.

 

 

 

 

M2.0x4.0B BIND

Fan hood

 

 

Fan cable

 

 

Heat sink

CN3380

Figure 4-31 Removing the heat sink (with fan)

PORTÉGÉ M780 Maintenance Manual (960-809)

[CONFIDENTIAL]

4-53

Page 362
Image 362
Toshiba 960-809 manual 20 Fan/Heat sink/CPU Replacement Procedures, Removing the Fan/Heat sink/CPU