Toshiba 960-809 manual Installing the base assembly and cover assembly

4 Replacement Procedures 4.14 Base assembly and Cover assembly

Installing the base assembly and cover assembly

The following describes the procedure for installing the base assembly and cover assembly. (See Figure 4-24 and 4-26.)

1.Place the base assembly onto the cover assembly and secure them with the following screws.

∙	M2.5×16.0B	FLAT HEAD screw	×3 (“16” in the figure 4-26)
∙	M2.5×6.0B	FLAT HEAD screw	×10 (“6” in the figure 4-26)

2.Turn the computer face up and stand the display 90 degrees.

3.Turn the display clockwise 90 degrees.

4.Secure the following screws.

∙ M2.5×10.0B FLAT HEAD screw ×2

5.Turn the display counter clockwise 90 degrees. (The display is returned to the former position.)

6.Set the hinge rear cover.

7.Connect the touch pad cable, LCD cable and digitizer cable to the connector CN3250, CN5601, and CN9540 on the system board.

8.Secure the base assembly and cover assembly with the following screw.

∙ M2.0×4.0B BIND screw ×1

4-44 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)