Tests and Diagnostics

3.34.7.10 IEEE1394 Test

1) Test content

This test accesses a file in the IEEE1394 device and verifies that the access can be made correctly.

Create a file with the specified size in the IEEE1394 device and delete the file after creating it

Simple Mode

This test mode creates a 4 MB file (Write), reads the file and compares it with the original file.

Detail Mode

This test mode creates a 12 MB file (Write), reads the file and compares it with the original file.

2) Test screen

Test detail: The drive under test execution is displayed..

Progress status: Displays the progress status of the test with the progress bar.

3) Result judgment

This test is regarded as 1PASS when every access to the files in all of the devices connected to the PC is successful.

If an error occurs even in a device, the error count is incremented.

In the case of PASS

The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen.

In the case of FAIL

The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on

3-144

[CONFIDENTIAL]

PORTEGE M780 Maintenance Manual (960-809)

Page 256
Image 256
Toshiba 960-809 manual 144