Toshiba 960-809 manual Installing the CPU/fin/DC fan

4 Replacement Procedures 4.20 Fan/Heat sink/CPU

Installing the CPU/fin/DC fan

To install the CPU/fin/DC fan, follow the steps below and refer to Figure 4-31 to 4-35.

1.Make sure that the cam of the CPU socket is in the unlock (OPEN) position.

2.Set the CPU to the correct position in the CPU socket. Make sure the position of the CPU (triangle mark) is correct to avoid damaging pins on the CPU.

NOTE: When replacing the CPU with a new one, stick the insulator (SQUARE INSULATOR) to the CPU in place.

3.Lock the CPU by rotating clockwise the cam on the CPU socket by 180 degrees with a flat-blade driver.

SQUARE INSULATOR

CPU

Mark

CPU socket

SQUARE INSULATOR

Figure 4-34 Installing the CPU

4-56 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)