Tests and Diagnostics
3.34.7.9FDD Test
1) Test content
This test accesses a file on a floppy disk and verifies that the access can be made correctly. Create a file with the specified size on a floppy disk and delete the file after creating it Perform the test after inserting a floppy disk to the drive.
■Simple Mode
This test mode creates a 128 KB file (Write), reads the file and compares it with the original file.
■Detail Mode
This test mode creates a 384 KB file (Write), reads the file and compares it with the original file.
2)Test screen
▼Test detail: The drive under test execution is displayed..
▼Progress status: Displays the progress status of the test with the progress bar.
3)Result judgment
■In the case of PASS
The PASS Count display on the test screen is zoomed in and (OK) is displayed in the Result field on the WinPE T&D screen
■In the case of FAIL
The Error Count on the test screen is zoomed in and (NG) is displayed in the Result field on the WinPE T&D screen.
The detail of the error is printed to the log of WinPE T&D. More details are as shown below.
[CONFIDENTIAL] | PORTEGE M780 Maintenance Manual |
