4.32 Switch board/Fingerprint sensor board4 Replacement Procedures

4.32 Switch board/Fingerprint sensor board

Removing the Switch board/Fingerprint sensor board

The following describes the procedure for removing the switch board/fingerprint sensor board. (See Figure 4-56.)

1. Remove the following screw securing the switch board and pull up the switch board.

∙ M2.5×4.0B

FLAT HEAD screw

×1

2.Disconnect the switch cable from the connector on the back of the switch board.

3.Remove the following screw securing the fingerprint sensor board and pull up the fingerprint sensor board.

∙ M2.5×4.0B

FLAT HEAD screw

×1

4.Disconnect the fingerprint sensor cable from the connector on the back of the fingerprint sensor board.

M2.5x4.0B FLAT HEAD

Switch board

Fingerprint sensor board

M2.5x4.0B FLAT HEAD

Switch cable

Fingerprint sensor cable

Figure 4-56 Removing the switch board/fingerprint sensor board

PORTÉGÉ M780 Maintenance Manual (960-809)

[CONFIDENTIAL]

4-101

Page 410
Image 410
Toshiba 960-809 manual Removing the Switch board/Fingerprint sensor board