4.6 HDD | 4 Replacement Procedures |
Installing the HDD
The following describes the procedure for installing the HDD. (See Figure
CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD.
1. Seat the HDD in the HDD holder and secure them with the following screws.
∙ M3.0×4.0C | FLAT HEAD screw | ×4 |
CAUTION: Do not apply pressure to the middle of the HDD assembly. It may damage the HDD assembly. Hold the HDD assembly by its corners.
2.Set the connector of the HDD cable upward and connect the HDD assembly to the connector. Press the HDD assembly to ensure a firm connection.
3.Set the HDD assembly into the slot.
4.Seat the HDD slot cover and secure it with two screws.
PORTÉGÉ M780 Maintenance Manual | [CONFIDENTIAL] |
