Tests and Diagnostics
3.34.4.3Test Procedure
This section describes operation procedure of WinPE T&D.
1)Select the test item to run from Test Item and check it. (If you put a check mark in the ALL Item Check check box, all test items are checked.)
2)Select the test mode of each test.
(If you put a check mark in the ALL Detail Check check box, all tests are performed in the Detail mode.)
3)Set the number of LOOP CONT, Multitask and CPU Stress.
4)Click on the [START] button and the test starts.
5)When "Multitask" is checked and a test is started, the test of Keyboard and Mouse is done once first. Next, other tests are started.
6)If PASS of each test reaches the value set to [LOOP COUNT] the number of pass times, the test is terminated, or if the [STOP] button is clicked, the test is terminated
Note: The test item grayed out indicates that the test is not ready yet and you cannot select it.
| [CONFIDENTIAL] | PORTEGE M780 Maintenance Manual |
