4.21 System board | 4 Replacement Procedures |
3.Turn up the black sheet and peel off the acetate tape.
4.Lift up the system board and disconnect the sensor cable from the connector CN9530 on the system board.
NOTE: Do not try to remove the system board with the sensor cable being connected.
5.Peel off the acetate tape and remove the modem jack from the slot.
6.Remove the system board form the cover assembly.
System board
Acetate tape
Modem jack
Sensor cable (Connected to CN9530)
Black sheet
Acetate tape
Bluetooth cable
Figure 4-37 Removing the system board (2)
PORTÉGÉ M780 Maintenance Manual | [CONFIDENTIAL] |
