APF-15U, APF-15TU, APF15TUC INSTALLATION INSTRUCTIONS
GENERAL DESCRIPTION
•Atlas Sound Models
•They are designed to be used in conjunction with compatible control equipment for high intelligibility reproduction of audible emergency and protective signals as well as voice messages.
•Model
•For use in ambient ranges from
|
| SPECIFICATIONS |
|
| SSIFI | ||
|
|
|
|
| A | E | |
|
|
|
| L |
| D | |
|
|
|
| C |
| UR | L |
POWER: | 15 Watts RMS |
| FREQUENCY RESPONSE: |
| |||
|
|
|
| ||||
SOUND LEVEL: | 103dB UL 10' Rating | CONDUIT CONNECTION: | For 1⁄2" Conduit |
|
|
| |
Power Tap Selector Switch
Switch | Impedance | 25V | *db@ | 70V | *db@ |
Position |
| Line | 10 Ft. | Line | 10 Ft. |
1 | 5.0 K | - |
| .9 W | 90 |
2 | 2.5 K | - |
| 1.8 W | 93 |
3 | 1.3 K | .48 W | 87 | 3.8 W | 95 |
4 | 666 | .94 W | 90 | 7.5 W | 98 |
5 | 333 | 1.8 W | 93 | 15.0 W | 100 |
6 | 89 | 7.5 W | 98 | Do Not Use | |
7 | 45 | 15.0 W | 100 | On 70 V. |
|
* UL 3dB Increment Rating
6.12"
(155.5mm)
NOTE: Terminal #2 is the positive terminal | Mounting Dimensions |
|
|
WIRING DIAGRAM
To conform with UL requirements, wires must be connected as shown in wiring diagram.
NOTE: The maximum wire size that can be connected to this device is 18 Gauge!
From | Speaker 1 | Speaker 2 |
Amplifier |
|
|
To Next Speaker or End of Line Resistor
CAUTION: Do Not loop wires under screw terminals. Break wire run to provide supervision of connection. Installation must comply with all Building Codes and NFPA guidelines. Installation must adhere to N.E.C. and NFPA 70/72 wiring directives and comply with all National and Local Building Codes.
Specifications are subject to change without notice
www.AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS U.S.A. • | TELEPHONE: (800) | FAX: (800) | ||
© 2005 ATLAS SOUND LP | Printed in U.S.A. | 000105 | ATS000702 RevE 01/05 | PN 8840400 |
