Atlas Sound L.P. All other trademarks are property of their respective owners. ATS003255 RevA 3/10
General Description
Environment-resistant SM Series loudspeaker systems offer quality sound reproduction and contemporary styling in a compact enclosure. System components consist of a highly efficient woofer section and FerroFluid cooled, titanium dome high frequency device. Vocal and musical clarity are optimized by the mathematically conceived, advanced design of the Atlas Sound TRX Control WaveGuide™ high frequency director. This design provides smooth, even sound coverage (65˚H x 65˚V). The high frequency section is symmetrical, for equal coverage
in both vertical and horizontal cabinet mounting positions. The Atlas Sound PolyGuard™ protection circuit provides high frequency component protection. To withstand the harshest environments, the Strategy Series SM82T surface mount loudspeakers are constructed of weather resistant materials: UV-resistant, talc impregnated, polypropylene injection molded cabinets; HYCONE Treated Paper woofer cones; powder coated aluminum grilles and all brass hardware. The Strategy Series speaker systems include a versatile, yet simple, C-bracket designed to provide easy vertical or horizontal installation on just about any surface. A 5⁄8"-27 threaded hole is provided on the C-bracket to allow the SM82T speaker to be mounted on any Atlas Sound microphone stand for near-field live sound applications. Four, 41⁄4" x 2" OC brass inserts are also provided
on the rear of the SM82T to accommodate OMNIMOUNT™ 30 series brackets. (Model 30.0 WB recommended for wall mounting)
All inserts for mounting knobs are standard 1⁄4"–20 to allow easy substitution of off-the-shelf vandal-proof torx head or “one-way” hardware. Input connectors include a two pole barrier strip with wire capture “caps” capable of accepting up to two #16AWG cables. 0.94, 1.9, 3.7, 7.5, 15, 30 and 60 watt taps, plus a transformer bypass setting for direct coupled 8Ω operation are screwdriver selectable via a sealed switch located near the input section on the rear of the cabinet. A tongue-in-groove cover with rubber wire exit grommet is provided to protect the input connections and transformer switch assembly from moisture. Systems are available in black or white and may be painted to accommodate any architectural considerations.
Architect & Engineer Specifications
The indoor / outdoor loudspeaker system shall be Atlas Sound Model SM82T_____(-B or -WH) or approved equal. Assemblies shall consist
of a 2-way woofer and tweeter, within environment-resistant housings constructed of paintable UV-resistant, talc impregnated, polypropylene, injection molded plastic finished in black (SM82T-B) or white (SM82T- WH). Each unit shall include a stamped, powder coated aluminum grille and removable C-shaped mounting bracket. All hardware inserts shall be brass and threaded 1⁄4"-20. The 150 Watt RMS system shall have
a 8" (133mm) HYCONE™ treated woofer and a 1" exit compression type tweeter. The dividing network crossover frequency shall be 2.5 kHz. The dividing network shall include protection circuits for the high- frequency component. Each unit shall include an internally mounted 60 watt 70.7/100V line matching transformer for use in distributed sound applications wattage taps and be screwdriver selectable via a sealed switch located near the input section. Wattage taps shall be 0.94, 1.9, 3.7, 7.5, 15, 30, 60 @ 70.7V plus transformer bypass setting for direct coupled 8-ohm operation. The loudspeaker system shall meet the following performance criteria: Power handling, 150 Watts RMS; Frequency response, 65Hz – 20kHz (±3dB); Sensitivity, 92dB SPL at one watt, 100Hz to 10kHz measured at a distance of one meter on axis. Input connectors shall include a two-pole barrier strip capable of accepting up to two #14AWG cable. A tongue-in-groove cover with rubber wire exit grommet shall be provided to protect the input connectors.
The loudspeaker system shall exhibit no performance or cosmetic degradation after a 100 hour salt spray test per ASTM B117.
The unit shall be 161⁄2" high x 91⁄16" wide x 87⁄16" deep.