![](/images/new-backgrounds/1245592/24559273x1.webp)
DC Input Voltage Specification
The power supply will operate within all specified limits over the input voltage range outlined in Table 9. The power supply will
Table 9. DC Input Rating
|
| Minimum |
| Nominal |
| Maximum |
|
| Maximum Input |
Parameter |
| Tolerance |
| Rating |
| Tolerance | 1 |
| Current |
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
Voltage | - | 38 V DC | to | DC |
| 13.5 Amps |
| ||
|
|
|
|
|
|
|
|
|
|
1Maximum input current is measured at the lowest input voltage that the power supply continues to operate. This is not to be used for determining agency input current markings.
DC Output Current Specifications
The combined output power of all outputs will not exceed 350 W. Each output has a maximum and minimum current rating shown in Table 10. The power supply meets both static and dynamic voltage regulation requirements for the minimum dynamic loading conditions. The power supply meets only the static load voltage regulation requirements for the minimum static load conditions.
Table 10. 350 W Load Ratings
|
| +3.3 V |
| +5 V |
| +12 V |
| 5 V SB | |
|
|
|
|
|
|
|
|
|
|
PEAK (10sec) |
|
|
|
| 30A |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MAX |
| 20A | 20A |
| 25A | 0.5A |
| 1.5A |
|
|
|
|
|
|
|
|
|
|
|
MIN DYNAMIC | 2.0A | 2.0A |
| 1.5A |
| 0A | 0A |
|
|
|
|
|
|
|
|
|
|
|
|
MIN STATIC | 1A | 1A |
| 0A |
| 0A | 0A |
|
|
|
|
|
|
|
|
|
|
|
|
Note: The maximum combined power of the 3.3 V and 5 V outputs is 150 W.
Peripheral Bay
The peripheral bay consists of the following two bays for removable media:
•Low profile media bay 1 – for a
•Low profile media bay 2 – for a
Hard Drive Tray
The hard drive tray supports two
Chassis Description | 25 |