IBM 343 manual Removing a Processor, Unlatching the Heatsink Retaining Clip

Removing a Processor

1.Observe the safety statements and “Handling Static-sensitive Devices”.

2.Detach the heatsink-retaining clip from the processor socket using a screwdriver or other tool as shown in Figure 20.

OM12827

Figure 20. Unlatching the Heatsink Retaining Clip

3.Remove the heatsink from the processor.

4.Raise the locking bar on the socket as shown in Figure 21.

OM11788

Figure 21. Raising the Locking Bar on the Processor Socket

5.Remove the processor from the socket.

6.If you removed the processor from the secondary socket and are not replacing it, you must install a terminator in its place.

76 xSeries 343 Hardware Maintenance Manual