Installing or Removing a Terminator

1.Observe the safety statements and “Handling Static-sensitive Devices”.

2.Raise the locking bar (B in Figure 22) on the socket (A in Figure 22).

3.Align the corner marks on the terminator (C in Figure 22) along the locking bar side of the processor socket.

4.Place the terminator into the socket.

5.Lower the locking bar (D in Figure 22) until it latches to the side of the processor socket.

6.Perform these steps in reverse to remove the terminator.

B

C

A

D

OM11787

Figure 22. Installing a Terminator

Upgrading the Hardware

77

Page 89
Image 89
IBM 343 manual Installing or Removing a Terminator, Installing a Terminator