62 xSeries 343 Hardware Maintenance Manual
Statement 14
CAUTION
Hazardous voltage,current, and energy levels might be present. Only a qualified service
technician is authorizedto remove the covers where the following label is attached.
Statement 1
DANGER
Electrical currentfrom power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
-Do not connect or disconnect any cables or perform installation, maintenance,or
reconfigurationof this product during an electrical storm.
-Connect all power cordsto a properly wired and grounded electrical outlet.
-Connect to properly wired outlets any equipment that will be attached to this product.
-When possible,use one hand only to connect or disconnect signal cables.
-Never turn on any equipment when there is evidenceof fire, water, or structural damage.
-Disconnect the attachedpower cords, telecommunications systems, networks, and
modems beforeyou open the device covers, unless instructed otherwise in the installation
and configurationprocedures.
-Connect and disconnect cablesas describedin the following table when installing, moving,
or opening covers on this product or attacheddevices.
To Connect: To Disconnect:
1. Turn everythingOFF.
2. First, attachall cables to devices.
3. Attach signalcables to connectors.
4. Attach power cordsto outlet.
5. Turn device ON.
1. Turneverything OFF.
2. First,remove power cords from outlet.
3. Removesignal cables from connectors.
4. Removeall cables from devices.