REMOTE CONTROL
Before making any connections to the
All system grounds (earth) must be connected to a common point.
Avoid powering equipment within a system from multiple power sources that may be separated by large distances
Connect all audio video sources and destination equipment Power up all desired sources and destination and displays
For each destination output select the appropriate input source by using the front panel input 1~4 select buttons, the supplied IR remote control, or through the RS 232 serial communications port.
Upon power up, the switcher will return to its last used setting before being powered down.
Series Code: 32 CB
1.SWITCH POWER ON or OFF.
Controller with a separate power to turn ON and OFF
2.OUTPUT 1 - 4 : OUTPUT TO TV DISPLAYS.
Output
Output
Output
Output
3.INPUT 1 - 6 : INPUT VIDEO SOURCES SELECTION.
Input
Input
Input
Input
Input
Input
4