Atlona AT-AV0808N user manual RS-232 SERIAL INTERFACE, Protocol Commands

RS-232 SERIAL INTERFACE

Pin	RS-232
1	-	Not used
2		Transmitter
3		Receiver
4	-	Not used
5	GND	Ground
6	-	Not used
7	-	Not used
8	-	Not used
9	-	Not used

RS-232

Atlona matrix switcher can be controlled via RS-232 serial control port to allow control of this unit via PC or control panel. Serial communication parameters are 9600 baud, 8 bit, No Parity and 1 stop bit - this is often referred to as 9600 8N1.

When the unit recognises a complete command it will perform the requested action - there is no delim- iter character required. The unit does not send out a message when a value is changed from the front panel or by IR control. If the unit needs to be controlled via the front panel in addition to the RS232

current settings

PROTOCOL COMMANDS

To Switch Inputs to Outputs

SBI0XO0Y

SBUD0XOY

SBUD08O3-Send

SBI08O03-Rcvd

5