Atlona At-DP400 Introduction, Features, Package Content, Applications, System Requirements

INTRODUCTION

The Atlona AT-DP400 is DVI (Dual Link) to Mini DisplayPort Converter. This is one of a kind device is specifically designed for any digital DVI source signal (such as a Mac/PC Computer with DVI output) to be displayed on the Apple iMac 27” or Apple 24” LED Cinema Display®. The DP400 allows users to take advantage of the extremely high resolution (2560x1440) that iMac 27” is capable of supporting. Along with its small, compact design, the converter is USB powered, which means that when your computer is ON the converter is ON as well. With the additional ability of passing along all EDID and HDCP information, the Apple tested and Apple approved DP400 is exactly what Mac users have been waiting for.

FEATURES

•Allows dual link DVI (digital only) signal to display on the iMac 27” or Apple 24” LED

•Supports Dual Link resolutions up to 2560x1600 or more common 2560x1440 used by iMac 27”

•True pixel to pixel signal

•Fully tested with all Apple computers ever made featured with DVI output

•HDCP Compatible, which means that you can play copy protected material though our converter

•Full EDID Return, the computer will not even know that it is connected though a converter, it will only see the display and the converter will pass all the display’s capabilities to the computer

•Re-Clocking technology will insure that signal stays the same quality as it was before entering the converter

•Video Pass-Though, no scaling (EDID and HDCP compliant)

•Easy to install and simple to operate

•Powered though attached USB cable (no external power needed)

•7-inch DVI and 7-inch USB cables are attached to the converter

•Converter is only hardware based, therefore will never have any issues with new operating systems or if Apple up- dates the current operating system

PACKAGE CONTENT

•DVI to Mini DisplayPort Converter with attached 7-inch DVI and USB Cables

•Operational Manual

APPLICATIONS

• Any Mac or PC computer with DVI output to be connected to iMac 27” or 24” Cinema Display

• Convert any digital DVI signal into Mini DisplayPort

SYSTEM REQUIREMENTS

Input DVI-D (digital only) source equipment and output iMac 27” or Apple LED Cinema Display®

Toll free: 1-877-536-3976	2	www.atlona.com
Local: 1-408-962-0515