INTRODUCTION
The Atlona
The DVI switcher is fully HDCP compliant, therefore could be used along with HDMI sources, DVI/HDMI adapters or cables will be required.
The Atlona 4x1 DVI Switcher could be controlled though IR remote, RS232 port or manually via buttons selection on the front panel of the switch.
Note: For applications where customer would need the computer to sense a monitor at all the time even when switcher is switched to a different computer, we recommend to use our EDID Recorder,
FEATURES
•The Atlona
•Switcher is featured with 4 x Stereo audio inputs and 1 x Output
•Switcher is able to support high resolutions up to 1920x1200 (WUXGA) or 1080p (1920x1080)
•
•High Bandwidth Support up to 6.75Gbps allows high motion video and high resolutions to be passed though without any delay or degradation
•Support wide range of Computer resolutions from VGA to WUXGA (640x480 ~ 1920x1200)
•HDTV resolutions: 480i/480p, 576i/576p, 720p, 1080i & 1080p (50/60Hz)
•Switcher is compatible with all DVI enabled computers and monitors (DVI output has to be digital only)
•Support Digital Video TMDS formats in Deep Color up to 36bits
•IR input jack, allows users to extend IR signal up to 1000ft from the switch
•Various control Options: IR, RS232 and Manual Push Button on the front panel
•Rack Mountable, comes with a set of rack ears – 1U
PACKAGE CONTENT
•1 x
•1 x Manual
•1 x IR Remote Control
•19 inch Rack Ears - 1U
•IR Extender allows user to connect an IR extension cable to the switcher and control the switch from up to 1000ft away.
•RS232 Cable
•Power Supply 12VDC, Universal Type 50/60Hz, 100~230 VAC
Toll free: | 2 | www.atlona.com |
Local: |