Atlona AT-DVITX-RSNET, AT-DVIRX-RSNET Introduction, Package Contents, Features, Before you start

Introduction

Atlona’s HDBaseT DVI extenders are engineered for high-resolution electronics with DVI connectors. Using HDBaseT technology the DVI extenders combine embedded audio, digital video, power (PoCcTM), Ethernet, RS-232, and IR control up to 328 feet (100 meters) over a single category cable.

Package Contents

•1 x AT-DVIXX-RSNET

•1 x 24V/2.7A DC Power Supply (transmitter only)

•2 x Female Captive Screw Connector (2 pin: power and 5 pin: IR)

•1 x Pair of wall mount ears

•1 x User Manual

Features

•Extends IR and audio/visual content up to 328ft @ 1080p over a single category cable

•Supports 4Kx2K pass through

•Captive screw IR I/O ports for emitting and receiving IR control signals for use with IR remote controls and 3rd party control boxes

•PoCc (Power over Category cable) feature removes the need for a power supply at the receiver

•Lossy and lossless multi-channel audio formats pass through (including Dolby TrueHD and DTS-HD Master Audio)

•When using an HDMI to DVI adaptor, HDMI Electronics will transmit a full range of HDMI signals including audio (if it is embedded in the video signal)

•Full 3D pass through

•HDCP compliant

Before you start

•Make sure when connecting the category cables a 568B termination method is used

•Avoid using patch panels and wall plates during initial set up and testing

•When installing the extenders DO NOT:

Cover the vents

Install in a wall

Install in an area without adequate air ventilation

Do not cover

vents!

NOTE: Product is not dual link DVI compatible

atlona.com	3	Toll free: 1-877-536-3976
		Local: 1-408-962-0515