Atlona AT-HDMI-V42 user manual Introduction, Features, Operation Controls and Functions

INTRODUCTION

The is a high performance HDMI™ v1.3 Switcher with remote control. It allows your various HDMI™ source to share two HDTV display. Simply pressing one button to select your desired HDMI™ source for display on the HDTV.

Each product in this series is compatible to HDMI™ v1.3 specifications, a cutting-age technology which defines the sup- port to transfer Deep Color (10-bit and 12-bit) video and new lossless compressed (Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) digital audio, with a high bandwidth up to 225MHz.

FEATURES

•HDMI™ 1.3, HDCP1.1 and DVI1.0 compliant Receiver.

•Deep color video up to 12bit, 1080p@60Hz.

•Four HDMI™ sources to connect up to two HDMI™ displays simultaneously.

•Supports DVI source and DVI display by using HDMI™ to/from DVI adaptor cable.

•Dolby Digital, DTS digital audio transmission (32-192kHz Fs sample rate).

•Supports a wide range of PC and HDTV resolutions from VGA to UXGA and 480i to 1080p.

•HDMI™ cable distance test with 1080p resolution: Input/Output source can run up to 30M/5.1CH.

•Full HDCP Compliant.

OPERATION CONTROLS AND FUNCTIONS

3.1. Front Panel

1 2 3

1.Remote Control Sensor.

2.HDMI™ input Select/Indicator: Press the “Input” button sequentially to switch to your desired input ( HDMI™ 1 to HDMI™ 4 ), the LED will illuminate to indicate which input source is selected

3.POWER Switch/Indicator: Press the “POWER” button to turn on/off the power, the power LED illuminate in red color means the power is turned on, when the LED not illuminate power is turned off.

Toll free: 1-877-536-3976	2	www.atlona.com
Local: 1-408-962-0515