Panel Description
AT-HDVS-TX
HDMI 1 | HDMI 2 |
DISPLAY INPUT
ON/OFF SELECT
1 | 2 | 3 | 4 |
VGA IN | POWER | |
AUDIO | ||
| ||
IN | HDMI 1 | |
| ||
| HDMI 2 | |
| VGA |
5 | 6 |
7
8
9
10
1.DISPLAY ON/OFF button: Controls display through
Note: If DISPLAY ON/OFF button is held for 3 seconds the signal will reset
2.INPUT SELECT button: Use to switch between VGA and HDMI source
3.HDMI 1: Connect first HDMI source here
4.HDMI 2: Connect second HDMI source here
5.VGA IN: Connect VGA source here
6.AUDIO IN: Connect analog audio here, only available with a VGA input
7.POWER LED: Will illuminate when receiving power
8.HDMI 1 LED: Lights up when HDMI input 1 is selected
9.HDMI 2 LED: Turns on when second HDMI input is selected
10.VGA LED: Illuminates when VGA input selected
- | + |
DC 24V | FIRMWARE | HD VIDEO OUT |
1
2
3
1.DC 24V: Connect included 24V2.7A power supply, with captive screw connector, here.
2.FIRMWARE: To update firmware connect mini USB to USB A cable from this port to a Windows computer.
Note: Update instructions will be included with firmware download found on atlona.com
3.HD VIDEO OUT: Connect category cable from there to a compatible receiver. (ex.
atlona.com | 4 | Toll free: |
Local: | ||
|
|
