Atlona AT-MDP12 user manual Rear Panel

2.LINK LED: When the device detects the display and sends out the signal the Link LED will illuminate.

3.SYNC LED: When the device detects the source signal the SYNC LED will illuminate.

4.Power LED: The LED will illuminate in green when power on and in red when in standby mode.

5.Reset button: Press this button to reset your EDID after each EDID setting.

2. Rear Panel

1 2 3 4

1.USB OUT: Connect a USB A type cable to the display monitor or PC/notebook for audio & USB signal bypass.

2.USB IN: Connect a mini USB cable from your PC/notebook for power and pass-though

3.MINI-DP OUT 1 & 2: Connect the MDP cable or MDP to DP cable to your MDP/DP input display for dis- playing a single source on two screens simultaneously.

4.MINI-DP IN: Connect the MDP cable or MDP to DP cable from the MDP/DP source for signal sending.

Toll free: 1-877-536-3976	4	www.atlona.com
Local: 1-408-962-0515