INTRODUCTION
Atlona Technologies AT-MDP12 is a 1 input to 2 outputs Mini DisplayPort splitter designed to allows any single Mini DisplayPort enabled computer (such as MacBook Pro, MacPro, Air, MacMini and so on) the ability to be displayed on two Mini DisplayPort monitors simultaneously. Most common monitors are Apple 24” LED and Apple iMac 27”, the splitter will also work with DisplayPort monitors (Dell, HP and others); however a Mini DisplayPort to DisplayPort adapter will be required, Atlona makes such an adapter as well. This unit supports video resolution up to 2560 x 1600 and PCM audio up to 7.1. Audio can also be bypassed through the unit’s USB connection, the same USB is used to power the splitter. With four sets of EDID formats, the AT-MDP12 provides a fast switch between source and display and saves the EDID’s reading sink time to allow image to be displayed properly.
PACKAGE CONTENTS
•AT-MDP12 Splitter
•Operation Manual
•1 x 5ft mini-DP cable (male to male)
•1 x 5ft Y cable 2x USB type A to 1x USB type B
SYSTEM REQUIREMENTS
Mini DisplayPort or DisplayPort output source equipment with Mini DisplayPort input monitors.
FEATURES
•Supports resolution up to 2560 x 1600
•Supports PCM audio 2.0 to 7.1, Apple monitors don’t allow audio to pass though Mini Display Port, therefore please use USB connection for Audio
•Supports EDID switching and settings.
•Powered by USB.
Toll free: 1-877-536-3976 | 2 | www.atlona.com |
Local: 1-408-962-0515 |
