Atlona AT-PA100-G2 atlona.com

Do not use a carriage return at the end of the commands. “.” and “%” terminate the commands.

Note: Factory Default settings, when first turned on, are: volume 50, bass 4, and treble 4.

Note: The AT-PA100-G2 has last memory, so if the power is lost the volume, bass, and treble settings

will remain the same as before the power loss.

Command Feedback Description

8xx% Bass of LINE: xx Preset the bass level, [xx] arranges from [00] to [08].

Example: 803% --> Bass of LINE: 03

9xx% Treble of LINE: xx Preset the treble level, [xx] arranges from [00] to [08].

Example: 905% --> Treble of LINE: 05

Audio

Rated Output 20 W x 2

40 W x 1 (Bridged Operation)

Gain 32dB

Frequency Range 20Hz to 20KHz

Signal/Noise Ratio 80dB (at max output)

Total Harmonic Distortion 1% (1KHz), 0.3% (20KHz) -- at nominal levels

Input Impedance Input 1&2: >10KΩ

MIC Input Impedance 48V: 35KΩ

MIC: 10KΩ

LINE: 75KΩ

Output Impedance 3.5mm Loop Out: 50Ω stereo

Speaker out: 4 ~ 8Ω Amplifier

Stereo Channel Separation >75dB from 20Hz to 20KHz

Common Mode Rejection Ratio >70dB from 20Hz to 20KHz

MIC Audio Detection Delay 1ms

Temperature

Operating 0°C to 40°C 32°F to 104°F

Storage -20°C to 60°C -4°F to 140°F

Humidity 20 to 90% non-condensing

Power

Consumption 40W

Idle Consumption 4W

Supply Input: AC100~240V 50/60Hz

Output: DC 24V/5A

Dimension

H x W x D 38 x 96 x 87 (mm) 1.5 x 3.78 x 3.43 (inch)

Weight

Device 0.3 kg 0.66 lbs

Shipping 0.98 kg 2.16 lbs

Certification

Power Supply CE, FCC, RoHS, cULus

atlona.com Toll free: 1-877-536-3976

Local: 1-408-962-0515