www.atlona.com | toll free: 1-877-536-3976
For International: 1-408-962-0515 7
REMOTE CONTROL
1) POWER ON
Turns unit ON with discrete command
2) POWER OFF
Turns unit OFF with discrete command
3) OUTPUT-1 RESLUTION SET / OSD
Setup the Output-1 resolutions or manual OSD
4) OUTPUT-2 RESOLUTION SET / OSD
Setup the Output-2 resolutions or manual OSD
5) SELECT VGA OUTPUT RESOLUTIONS
Select VGA output resolutions as following: SVGA 800x600,
XGA 1024x768, SXGA 1280x1024, WXGA 1366x768, WSXGA+
1680x1050, MAX WUXGA 1920x1200
6) SELECT HDMI OUTPUT RESOLUTIONS
Select HDMI output resolutions as 720p or 1080p
7) MANUAL OSD
OSD navigation buttons to setup or adjust settings
8) AUDIO VALUE ADJUSTMENT
Volume Up and Down adjustment
9) SELECT OUTPUT-1 SOURCES
Inputs 1-8 source selections to be displayed from Output-1
10) SELECT OUTPUT-2 SOURCES
Inputs 1-8 source selections to be displayed from Output-2
Before making any connections to the AT-PROHD82M, observe the following:
• Ensure the main voltage supply matches the label on the supplied power plug (+/- 10%)
• Ensure that the power switch is OFF
• Ensure that all system grounds are connected to a common point
• Connect all audio/video sources and destination equipment
• Power up all source and destination audio/video sources
• For each destination output, select the appropriate input source by using the front panel input 1-8 select
buttons, the supplied IR remote control or through the RS-232/RS-485 serial communications port
• Upon power up, the AT-PROHD82M will return to its last used setting before powering down