CONNECTION AND OPERATION
1.Connect transmitter module to the USB connection on a computer.
2.Connect mouse, keyboard, printer, scanner, phone or any other USB enabled device to the receiver mod- ule.
3.Install or use
4.Make sure to use a cable tester to check all wires are correctly terminated. (Incorrect Termination may cause damage to the receiver module).
TROUBLESHOOTING
No Connection or Signal is going in and Out:
a. Please test your RJ45 cables with a Fluke or similar tester to make sure that all the wires are connected and the distance is within the limits.
b. If you are using patch panel or and RJ45 wall plates, the distance will be reduced, please do a direct connection bypassing all additional equipment.
c. Please try to
Toll free: | 4 | www.atlona.com |
Local: |
