INTRODUCTION
The Atlona
The VGA10SS is also featured with local VGA and audio outputs, meant to either connect to a local display for monitoring or daisy chaining to another VGA10SS amplifier.
Note: Receiving models
PACKAGE CONTENTS
•1 x
•1 x 5v Power supplies (Universal 110/240V)
•1 x Set of Wall Mounting Ears
•1 x Instructions manual
FEATURES
•Transmits VGA with Stereo Audio up to 1000ft away to 10+ locations
•Supports Full HD Video with resolutions up to 1920x1200
•Supports high resolution Video VESA: 640x480, 800x600, 1024x768, 1280x800, 1280x768, 1280x1024, 1680x1050, 1600x1200, 1920x1080, 1920x1200
•Compatible with receiving modules:
a.
•DDC adjustments (Internal and Extender modes can be used)
•Supports all VESA formats which is perfect when used with specialized projectors or commercial LCD panels.
•Local VGA/Audio output for local monitoring display or daisy chaining ability to go to another VGA10SS
•Rack Mountable – 1U
CONNECTION AND OPERATION
1.Connect the VGA Source e.g., Computer, Video Codec, switch to the
2.Connect the VGA Display e.g., Projector, LCD/LED or a switch to (receiving unit) – (receiving unit is sold separately)
3.Terminate the CAT5, 6 or 7 wire with 568B termination and use a tester to make sure all pins are wired correctly before connect it to the VGA10SS transmitter.
4.Connect the power supplies to both transmitter and receiver and the video and in a few seconds the video should appear on the display.
Toll free: | 2 | www.atlona.com |
Local: |