PREPARATION FOR OPERATION
Before getting started make sure to follow these steps:
•Install the battery into its housing with the polarity order shown on the main body of the unit.
•Switch on the Aries scope with the protective lens cover still attached to the lens.
•Make sure that the green luminance of the light intensifier tube is present.
•Observe the scene, and adjust the diopter and/or lens for optimal image clarity.
•You may now enter a dark environment or simply shut the lights off in order to darken the room.
•Next, remove the lens cap/daylight filter.
•Observe the scene, and adjust the front lens for ideal focus.
•Finally, you may want to turn the infra red (IR) illuminator on. Notice the ability of the Aries scope to see in total darkness with the aid of the IR illuminator.
Battery
installation
OPERATING
RETICLE BRIGHTNESS ADJUSTMENT
By rotating the knob you may adjust the ret- icle’s brightness. Adjustment could be easily seen if you look through the scope while adjust- ment.
MOUNTING
1.Slightly loosen the horizontal and vertical fixing screws on the 7/8” weaver rail built into the scope.
2.Place the scope on the dovetail mount of the fire arm making certain that the mount aligns
with the receptor attachment screw groove. Adjust as necessary.
3. Tighten the horizontal fixing screws.
NOTE: Receptor attachment screws may need to be tightened after continuous shooting.
FOCUSING
Locking knob
To focus your riflescope you will need to adjust the diopter first thing. Simply turn the diopter clockwise until it stops. Then, while looking through the diopter at a subject, slowly turn the diopter back counter clockwise until the grain in the image is sharp.
NOTE: We suggest that you focus the diopter during daylight with the filter on.
Before focusing turn the lens fixation handle clockwise, to unlock the lenses.
Next, focus the front lens until the image and the grain are both sharp. When you are in the low- light conditions and the daylight filter is off you may focus the front lens to receive a sharp image, the diopter should not be adjusted.
NOTE: The front lens should be readjusted as you view objects at different distances.
When you are finished to adjust the front lens focus, you should lock the front lens in place by turning the lens fixation knob clockwise. Fail- ure to do this may cause shift in aimpoint when shooting.
3
