3
You may desire a different fiel d of coverage from the IR illum inator, if so, the beam is focus -
able. By turning the lens of the IR illuminator you will slightly change the beam width.
NOTE: The IR will automatically turn off when the unit’s main power switch is turned to the OFF
position.
LOW BATTERY INDICATOR
The low battery indicator is an other feature th at is programm ed into your “Sma rt” scope . If
the batteries sta rt losing volta ge LED “B” will sta rt to pulse, it is tim e to change your bat ter-
ies.
USING THE CAMERA ADAPTER (OPTI ONAL)
To use your MO-4 with a 35mm camera or camcorder you will need the following:
1) If you plan to use a camcord er then your ca mcorder must have a MACRO feature. Mo st
modern camcorders today have a MACRO feature built-in.
2) If you plan to use a 35mm camera yo u will need a MACRO lens. If you don ’t have one we
advise that you contact your local camera store.
3) You may or may not need a STEP-UP or STEP-DOWN ring i n order to adapt the camera
adapter to your lens.
NOTE: The camera adapter comes with 37-mm and 52-mm threads. If you need other sizes your
local camera store should be able to help.
• Remove the rubber eye-cup from the MO-4
• Screw the cam era adapter onto the front of the lens on your Video camer a’s lens or your
35-mm camera’s lens.
• Loosen the three set screws on the camera adapter.
• Place the camera adapter over the MO-4’s eyepiece.
• Tighten the three set screws to fit snugly to the MO-4 eyepiece
• You may need to focus the 35-mm camera or video camera in combination with the MO-4 in
order to get the sharpest image possible.
• We suggest that you find an open space to work in. Focus the MO-4 so that the scene is at its
sharpest. For the best results you should disable the auto focus (if any) on either the 35mm
camera or the video c amera and manually focus the 35-mm camera or the video camera.
Once the image is in sharp, then simply adjust the MO-4 front lens to change the focus.
• An important part to remember is that you are not taking a picture of an object that is far away
from you, but you are actually taking a picture of a phosph orous screen of the MO-4 that is
only 2-3 inches away.
USING THE 6X DOUBLER: (OPTIONAL)
• Unscrew 90 mm lens off the body of the MO-4 ( make sure that the unit is turned off).
• Screw the doubler into the body of the MO-4 where the 90 mm lens is removed.
• Screw the 90-mm lens into the doubler.
NOTE: When attaching the doubler do not be afraid to use a little force.
Screw
Camera adapter
Joint ring