2. SPECIFICATIONS
Air Speed | Up to 9600 bps |
|
|
DTE Rate | 300, 1200, 2400, 9600, 19200, 57600 bps (DIP |
| switch selectable) |
Data Compression & Error Detection | |
|
|
Transmit Power | 3 W |
Power Supply | 5 volts DC @ 1500 ma |
Interface | RS 232 Asynchronous |
Signals supported | TXD, RXD, CD, DSR, RTS, CTS, RI, DTR |
Operating Temperature Range | |
Custom Configurations | Yes |
3.0MODEM SETUP AND REGISTRATION
3.1What you need to provide:
∙5 Volts, 1500 ma regulated DC Power Supply
∙Host PC with a terminal program, such as Hyper terminal, ProComm etc.
∙Mobile Identification Number (MIN) provided by your Cellular service provider. MIN is your cellular phone number.
∙System ID (SID) information (from your cellular service provider) SID uniquely identifies your cellular service provider.
3.2Registering the Cellular Modem Unit:
To register your cellular modem unit, do the following:
∙Contact your cellular service provider
∙Provide the cellular operator with the ESN (Electronic Serial Number) number located on the label at the top of your unit.
∙Inform the cellular operator that the unit is an AMPS ONLY ANALOG unit with a power rating of Class 1 (power 3 W).
∙The cellular operator will register your unit and provide you the following information:
o MIN (Mobile Number) Number o System preference: A or B
o SID (System ID)
Page 6 of 6
