Aube Technologies programmable thermostat  Operating Modes,  Energy-saving Schedule,  Warranty

Operating Modes

Automatic - The temperature is set according to the energy-saving schedule. To place the thermostat in this mode, press Mode until is dis- played. The icons of the current period and preset temperature are also dis- played.

Temporary Bypass: If you modify the setpoint (by pressing the , ,

or button) when the thermostat is in automatic mode, the new set- point will be used until the end of the current period. When the next period starts, the temperature set for that period becomes the new set- point.

Manual - The energy-saving schedule is not used. The temperature must be set manually. To place the thermostat in this mode:

Press Mode until is displayed.

Set the temperature using the , , or button.

Vacation - The thermostat is set to the Vacation temperature. Press both and buttons simultaneously to place the thermostat in Vacation mode.

Energy-saving Schedule

The schedule consists of 4 periods per day which represents a typical week day. You can program the thermostat to skip the periods that do not apply to your situation. For example, you can skip periods 2 and 3 for the weekend.

Period Description Associated preset temperature

Wake-up

Away from home

Return home

Sleep

The Comfort ( ) temperature is used in periods 1 and 3 and the Economy () temperature is used in periods 2 and 4. For example, when the period changes from 1 to 2, the setpoint automatically changes from Comfort setting ( ) to Economy setting ().

You can have a different program for each day of the week; i.e., each period can start at different time for each day of the week. The thermostat has been programmed with the following schedule.

Period Setting MO	TU	WE	TH	FR	SA	SU
6:00	6:00	6:00	6:00	6:00	6:00	6:00
AM	AM	AM	AM	AM	AM	AM
8:00	8:00	8:00	8:00	8:00	--:--	--:--
AM	AM	AM	AM	AM
6:00	6:00	6:00	6:00	6:00	--:--	--:--
PM	PM	PM	PM	PM
10:00	10:00	10:00	10:00	10:00	10:00	10:00
PM	PM	PM	PM	PM	PM	PM

To modify the schedule:

Press Pgm to access the programming mode. Period 1 is selected.

Press Day to select the day to program (hold for 3 seconds to select the entire week).

Press Hour and Min to set the start time of the selected period, or press Clear if you want to skip the period (--:-- is displayed).

Press Pgm to select another period, or press Day to select another day. Then repeat step 3.

Press Mode to exit the programming mode.

NOTE: If no button is pressed for 60 seconds, the thermostat will automati- cally exit the programming mode.

 Troubleshooting

Problems	Solutions
The thermostat’s screen is blank.	The thermostat’s switch is set to Off.
LO is displayed.	The measured temperature is below the
	display range. Heating is activated.
HI is displayed.	The measured temperature is above the
	display range.
The wrong time is displayed.	The thermostat was without power for
	more than 2 hours.
The measured temperature is wrong.	The thermostat is located in a spot
	exposed to an air draft.
The heater is always On.	Check the thermostat wiring.
The heater is off however the thermo-	Check the thermostat wiring.
stat indicates that heating is On.
The temperature does not change	Check that the thermostat is in Automatic
according to the energy-saving	mode. Check also the schedule and clock
schedule	settings.

Technical Specifications

Power: 240 Vac, 60 Hz

Maximum load: 16 A maximum (resistive only) 3840 watts @ 240 Vac

Display range: 32 °F to 140 °F (0 °C to 60 °C)

Display resolution: 0.1 °F (0.1 °C)

Setpoint range: 40 °F to 86 °F (5 °C to 30 °C)

Setpoint interval: 1 °F (1 °C)

Storage: -4 °F to 120 °F (-20 °C to 50 °C)

Data backup: In the event of a power outage, most settings are saved. Only the time must be re-adjusted if the power outage lasts more than 2 hours. The thermo- stat will return to the mode that was active prior to the power outage.

Warranty

Honeywell warrants this product, excluding battery, to be free from defects in the work- manship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the prod- uct is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell's option).

If the product is defective,

(i)return it, with a bill of sale or other dated proof of purchase, to the place from which you purchased it, or

(ii)contact Honeywell. Honeywell will make the determination whether the product should be returned, or whether a replacement product can be sent to you.

This warranty does not cover removal or reinstallation costs. This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.

Honeywell's sole responsibility shall be to repair or replace the product within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some prov- inces, states or regions do not allow the exclusion or limitation of incidental or conse- quential damages, so this limitation may not apply to you.

THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PUR- POSE, IS HEREBY LIMITED TO THE THREE-YEAR DURATION OF THIS WARRANTY. Some provinces, states or regions do not allow limitations on how long an implied war- ranty lasts, so the above limitation may not apply to you.

This warranty gives you specific legal rights, and you may have other rights which vary from one province, state or region to another.

Customer Assistance

705 Montrichard Saint-Jean-sur-Richelieu (Québec) J2X 5K8

Canada

1-800-831-2823 aube.service@honeywell.com www.aubetech.com

R

TH110-DP-P Printed in USA 2011-04-14 2/6