SETTING TIME AND DAY
Before programming, set the clock to the correct time.
1.You can change the time format at anytime back and forth from 24 to 12 hour. To do so, maintain MIN key pressed down as HEURE key is pressed and released. Then, release MIN key.
2. Set the day by using the JOUR key (If the current day is
" Tuesday ", press and release JOUR key until TU indicator appears on the lower area of the screen).
3.Set the time by using the HEURE and MIN keys (For the 12 hour format, if you are setting an afternoon or evening time, make sure that the PM indicator is turned on at left side of the screen).
4.Close the door or press on one of the ENR keys to return to normal operations.
OPERATING MODES
The wall switch has 2 operating modes : the MANual and AUTOmatic modes.
In the MANual mode, it works like a regular single pole switch. By pressing on the door, the user can turn the light on and off. The display shows the " MAN " indicator as well as light the state (ON or OFF).
The AUTOmatic mode executes in sequence (hourly) the user's recorded programs. To place the wall switch in this mode, press on the door for 3 seconds until AUTO appears on the screen. The display shows the active program number and the light state (ON or OFF).
To temporarily overpass the programming, press on the door. " AUTO
"and programmed light state indicator remain on and the overpassed light state indicator will flash. To return in manual mode, press and hold the door for 3 seconds until " MAN " indicator is shown on display.
RECORDING THE PROGRAMS
The memory of this programmable wall switch can hold up to 7 programs. Each program consists of a time ON (turn on) and a time OFF (turn off) which can be run for a single day or for everyday of the week.
ATTENTION : Both ON and OFF programming sequences must be recorded.
1.Open the door of the wall switch using a small screwdriver.
2.Press on the PGM key.
The display will show the number 1 (program 1) on the lower right corner and the program state (on/off) on the upper right corner. Note that the clock is replaced by
3.Press on the JOUR key to select the day to which you want the light to turn on.
If you want the program to be repeated each day of the week, keep pressing on JOUR several times until every days of the week appears on the screen all together.
4.Press on the HEURE and MIN keys to set the time to which you want the light to turn on.
Make sure that " PM " indicator appears on the screen if you want an afternoon period (12 hour time format).
5.Press a second time on PGM key to set the time for the light to turn off. Repeat steps 3 and 4 to set the time.
If the program " 1 ON " is set for every day of the week, the program " 1 OFF " will automatically be set for every day.
6. Press a third time on PGM key to record programs 2 to 7.
If you need only one program, just leave the others inactive.
If you want to erase a program, select it by using the PGM key and then hold PGM key for 3 seconds. The program will be erased when the display will show
7.Close the door or press on one of the ENR keys to return to normal operation.
MEMORY BACKUP
This programmable wall switch is equipped with a rechargeable battery which will protect your programs during a power shut down.
Note that the screen blanks during a power failure.
CHARACTERISTICS
Model : | |
Supply : | 230 VAC, 50 / 60 Hz |
LOAD : | 15 Watts minimum, 500 Watts maximum |
Approvals : | CE |
Storage temperature range :
Operating temperature range : 0 to 50 *C
WARRANTY
AUBE TECHNOLOGIES INC. ONE YEAR LIMITED WARRANTY
This product is warranted against material defects and workmanship in normal use for a period of one year, from the date of the original pur- chase from authorized dealers. Warranty does not cover transportation costs. Nor does it cover a product subjected to misuse or accidental damage.
This limited warranty is in lieu of all other warranties, obligations or lia- bilities expressed or implied by the company.
In no event shall AUBE Technologies inc. be liable for consequential or incidental damages resulting from installation of this product. Within this period, any product proven defective in normal use will be repaired or replaced, at AUBE's option, without charge for either parts or labour, provided that the defective product with the original sale receipt is returned to the original dealer or is shipped
AUBE TECHNOLOGIES INC. Customer Service
20, Avenue de l'Escouvier 95205 Sarcelles Cedex France
Tel. : 01 39 33 04 60
Fax : 01 39 33 04 79
www.aubetech.com
19/12/00
