Audio-Technica manual AT-MX351 Rear Panel, Unbalanced line-level -10 dBV output. RCA jack

AT-MX351 Rear Panel

1.External Control connector. For TTL output, plus closure-control input for external control of each channel.

2.Link In/Link Out. Provides for daisy-chaining of multiple mixers when more than four microphones are used.

3.Line/Mic balanced output. Level can be changed via internal switch (see page 10). XLRM-type connector.

4.Unbalanced line-level (–10 dBV) output. RCA jack.

5.Aux In. Unbalanced, line-level (–10 dBV), auxiliary input.

6.Preamp Outputs. Independent, unbalanced (–10 dBV), switchable pre/post-controller outputs from mic channels.

7.Inputs. Balanced microphone inputs for low-impedance dynamic or condenser mics. Can be changed to line-level inputs via internal switches (see page 10). XLRF-type connectors. Can supply 48V phantom power via internal switches.

8.Power input. 120V/230V AC, 50/60 Hz. Select input voltage via switch on bottom panel.

2 5 6 7 8

			Aux		3	1
			in
			-10			Pre-
						amp
						out
					4	2
ExternalControl	LinkIn LinkOut	Line/Mic	Outputs	-10	Channel	Input4	Input 3	Input 2	Input1	AC In
		0/-50

1 3 4

Figure 2. Rear panel

7