Audio-Technica at2020 usb Specifications, Federal Communications Commission Statement, AT2020 USB

	467
	AT2020 USB
Specifications
Element	Fixed-charge back plate, permanently
	polarized condenser
Polar pattern	Cardioid
Frequency response	20-16,000 Hz
Phantom power requirements	USB Power (5V DC)
Bit depth	16 bit
Sample rate	44.1 kHz
Weight	374 g (13.2 oz)
Dimensions	162.0 mm (6.38") long,
	52.0 mm (2.05") maximum body diameter
Output connector	USB-type
Accessories furnished	Pivoting stand mount for 5/8"-27 threaded
	stands; 5/8"-27 to 3/8"-16 threaded
	adapter; soft protective pouch; tripod
	desk stand; 3.1 m (10') USB cable

In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

Specifications are subject to change without notice.

Federal Communications Commission Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resi- dential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

frequency response: 20 –16,000 Hz

50	100	200	500	1k	2k	5k	10k	20k
			Frequency in Hertz
LEGEND		12" or more on axis

polar pattern

330˚	0˚
	30˚
300˚	60˚
270˚	90˚
240˚	120˚
		LEGEND
210˚	150˚	200 Hz
		1 kHz
	180˚
		5 kHz
SCALE IS 5 DECIBELS PER DIVISION
		8 kHz

10 dB

Response in dB

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2010 Audio-Technica U.S., Inc. audio-technica.com	0001-0205-01