Audio-Technica AT2022 manual Specifications

AT2022

To reduce the environmental impact of a multi-language printed document, product information is available online at www.audio-technica.com in a selection of languages.

Afin de réduire l’impact sur l’environnement de l’impression de plusieurs, les informations concernant les produits sont disponibles sur le site www.audio-technica.com dans une large sélection de langue.

Para reducir el impacto al medioambiente, y reducir la producción de documentos en varios leguajes, información de nuestros productos están disponibles en nuestra página del Internet: www.audio-technica.com.

Para reduzir o impacto ecológico de um documento impresso de várias linguas, a Audio-Technica providência as informações dos seus produtos em diversas linguas na www.audio-technica.com.

Per evitare l’impatto ambientale che la stampa di questo documento determinerebbe, le informazioni sui prodotti sono disponibili online in diverse lingue sul sito www.audio-technica.com.

Der Umwelt zuliebe finden Sie die Produktinformationen in deutscher Sprache und weiteren Sprachen auf unserer Homepage: www.audio-technica.com.

Om de gevolgen van een gedrukte meertalige handleiding op het milieu te verkleinen, is productinformatie in verschillende talen “on-line” beschikbaar op: www.audio-technica.com.

Specifications
Elements	Fixed-charge back plate, permanently
	polarized condenser
Polar pattern	X/Y Stereo
Frequency response	20 –20,000 Hz
Low frequency roll-off	150 Hz, 6 dB/octave
Open circuit sensitivity	-41 dB (8.9 mV) re 1V at 1 Pa
Channel balance	<2.5 dB
Impedance	200 ohms
Maximum input sound level	122 dB SPL, 1 kHz at 1% T.H.D.
Dynamic range (typical)	103 dB, 1 kHz at Max SPL
Signal-to-noise ratio1	75 dB, 1 kHz at 1 Pa
Battery type	1.5V AA/UM3
	WARNING: The AT2022 is designed for
	battery operation only. Do not attempt to
	use when phantom power is present. Possible
	damage to the microphone may result.
Battery current / life	1.2 mA / 500 hours typical (alkaline)
Switch	Off, on/flat, on/roll-off
Weight (less cable and accessories)	270 g (9.5 oz)
Dimensions	192.0 mm (7.56") long,
	65.0 mm (2.56") maximum head diameter,
	21.0 mm (0.83") body diameter
Output connector	Integral 3-pin XLRM-type
Cable	0.5 m (1.6') long, 3 conductor, shielded,
	vinyl-jacketed stereo cable with 3-pin
	XLRF-type connector at microphone end and
	3.5 mm (1/8") TRS connector at output end
Audio-Technica case style	S14
Accessories furnished	AT8405a stand clamp for 5/8"-27 threaded
	stands; fuzzy windscreen; battery; soft
	protective pouch

In the interest of standards development, A.T.U.S. offers full details on its test methods to other industry professionals on request.

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL

1Typical, A-weighted, using Audio Precision System One. Specifications are subject to change without notice.

frequency response: 20–20,000 Hz

									in dB
								10 dB	Response
50	100	200	500	1k	2k	5k	10k	20k
			Frequency in Hertz
LEGEND		12" or more on axis
		Roll-off

polar pattern		polar pattern		polar pattern
(200 Hz in 90º position)		(1 kHz in 90º position)		(8 kHz in 90º position)
330˚	0˚	330˚	0˚	330˚	0˚
	30˚		30˚		30˚
300˚	60˚	300˚	60˚	300˚	60˚
270˚	90˚	270˚	90˚	270˚	90˚
240˚	120˚	240˚	120˚	240˚	120˚
210˚	150˚	210˚	150˚	210˚	150˚
	180˚		180˚		180˚
SCALE IS 5 DECIBELS PER DIVISION		SCALE IS 5 DECIBELS PER DIVISION		SCALE IS 5 DECIBELS PER DIVISION

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224
Audio-Technica Limited, Old Lane, Leeds LS11 8AG England
©2011 Audio-Technica U.S., Inc. audio-technica.com	P52270