Manuals / Audio-Technica / Musical Instruments & Equipment / Microphone

Audio-Technica manual Power Sources AT895Z Zeppelin-Type Windscreen

Models: AT895

1 8
Download 8 pages 24.96 Kb
Page 6
Image 6

Power Sources

AT895Z Zeppelin-Type Windscreen

The AT895CP Control Pack may be powered three different ways:

•From an AC adapter, using an industry-standard 4-pin XLR connection. (An AC power supply with 9V DC output is included in the AT895/MK System).

•From an Anton/Bauer or similar-type external 12-14V battery source.

•From three 9V batteries in a click-on AT895BH Battery Housing (included in the AT895/RK System) for completely self-contained operation.

The two sections of the AT895Z Zeppelin-type windscreen bayonet-latch together. To open the windscreen, rotate the rear section to the left (counter-clockwise, viewed from the rear), then pull the sections apart. Place the “nose” of the microphone in the foam recess provided in the front section. Slide the rear section of the windscreen over the handle of the mic until it reaches the front section, making certain the mic’s “nose” remains in its foam recess. Engage the bayonet lugs on the windscreen and rotate the rear section fully to the right (clockwise). Once installed, the windscreen may be rotated on the microphone if desired.

AT895BH Battery Housing

AT895PG Pistol-Grip Shock Mount

Battery Selection and Installation

Always use fresh alkaline or lithium 9V batteries. For greatest reliability and longest operation, replace all three batteries at the same time, using identical types.

To open the battery tray, press down firmly on the tray release button until it clicks; then lift the tray slightly and slide it out. Insert three batteries, observing polarity as marked inside the battery compartment. Slide the battery tray closed, making certain it clicks shut. Due to current requirements of the system, always use three batteries.

Attaching the Battery Housing to the Control Pack

Slide the Battery Housing onto the Control Pack. When it is fully seated, the two release buttons at the bottom of the Battery Housing will click into place.

To remove the Battery Housing, simultaneously push both release buttons while sliding it down and off the Control Pack.

The Battery Housing may be in place when external power is used. The batteries will still be consumed, but at a slower rate, depending upon the external voltage. The batteries will also provide “back-up power” in case of external supply interruption.

For correct balance of the microphone and proper orientation of the elements, the microphone should be mounted in the AT895PG with the Audio -Technica logos visible between the rubber rings along the left and right sides. In use, the rubber rings should be positioned behind the Pistol-grip, above the user’s forearm. (If the Zeppelin is to be used, the mic must be installed in it before mounting the mic in the Pistol-grip.)

6

Page 5 Page 7
Page 6
Image 6
Audio-Technica Power Sources AT895Z Zeppelin-Type Windscreen, AT895BH Battery Housing AT895PG Pistol-Grip Shock Mount
Page 5 Page 7

AT895 specifications

The Audio-Technica AT895 is a high-performance shotgun microphone designed to capture audio with precision and clarity, making it an ideal choice for professionals in the fields of broadcasting, film production, and live sound reinforcement. Known for its superior directional characteristics and advanced features, the AT895 stands out in the competitive landscape of high-end microphones.

One of the primary features of the AT895 is its hypercardioid polar pattern, which enables it to effectively isolate sound sources while minimizing background noise. This characteristic is particularly beneficial in environments where multiple sound sources compete for attention, ensuring that the microphone captures the desired audio without unwanted interference.

The AT895 employs a high-frequency response range, extending up to 20 kHz, allowing it to reproduce even the most nuanced audio details. This wide frequency range is coupled with a low self-noise level, enabling the microphone to produce clear audio recordings even at low sound levels. The microphone also features a robust construction, designed to withstand the rigors of professional use, making it a reliable choice for on-location recording.

In terms of technology, the AT895 incorporates Audio-Technica's advanced signal processing, which helps ensure optimal sound quality. The microphone's internal circuitry is engineered to provide a linear frequency response, contributing to the accuracy and naturalness of recorded audio. Additionally, the AT895 utilizes a specialized shock mount system that reduces handling noise and vibration, further enhancing audio fidelity.

Moreover, the AT895 is equipped with a switchable low-frequency roll-off filter, which helps eliminate low-frequency rumble and handling noise. This feature is particularly useful in outdoor settings where wind and environmental noise can pose challenges. The microphone also includes a windscreen to reduce wind noise, enhancing its usability in various atmospheric conditions.

With its combination of advanced technology, thoughtful design, and professional-grade performance, the Audio-Technica AT895 has become a favored tool for audio engineers and content creators alike. Whether used for interviews, voiceover work, or field production, the AT895 delivers exceptional sound quality, making it a valuable addition to any audio toolkit.