Audio-Technica PRO45W manual PRO 45/PRO 45W SPECIFICATIONS†, Dimensions, Optional Accessories

PRO45 and PRO45W
Polar Pattern		PRO 45/PRO 45W SPECIFICATIONS†
0		Element	Fixed-charge back plate
			permanently polarized condenser
	30
330		Polar Pattern	Cardioid (Unidirectional)
		Frequency Response	70-16,000 Hz
300	60	Open Circuit Sensitivity	–37 dB (14.1 mV) re 1V at 1 Pa*
		Impedance	100 ohms
		Maximum Input Sound Level	134 dB SPL, 1 kHz at 1% T.H.D.
270	90	Signal-to-noise Ratio1	66 dB, 1 kHz at 1 Pa*
		Dynamic Range (Typical)	106 dB, 1 kHz at Max SPL
		Phantom Power Requirements	9-52V DC, 2 mA typical
240	120	Weight (less cable)	0.5 oz (15 grams)
		Dimensions	2.24" (56.9 mm) long,
210	150		0.47" (12.0 mm) head diameter

180		Output Connector	3-pin XLRM-type
	SCALE IS 5 DECIBELS PER DIVISION	Cable	25' (7.6 m) long (permanently attached
LEGEND			to microphone), 0.10" (2.6 mm) diameter,
200 Hz			2-conductor, shielded cable
1 kHz		Accessories Furnished	Foam windscreen, steel hanger
5 kHz
8 kHz
		† In the interest of standards development, A.T.U.S. offers full details
			on its test methods to other industry professionals on request.
		* 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
		1	Typical, A-weighted, using Audio Precision System One

0.47"

12.0 mm

2.24"

56.9 mm

Dimensions

25

7.6 m

0.10"

2.6 mm

2.68"

68.0 mm

0.75"

19.0 mm

Optional Accessories:

AT8104a large metal windscreen.

AT8117 large foam windscreen for high-wind conditions.

CP8201 line matching transformer (Lo-Z to 50,000 ohms).

AT8202 adjustable in-line attenuator for use with balanced Lo-Z microphones.

AT8314 2-conductor, shielded, vinyl-jacketed, broadcast-type cable with XLRF-type connector at microphone end, XLRM-type connector at equipment end. Available in 10', 20', 25', 30', 50' & 100' lengths.

CP8506 four-channel 48V phantom power supply (AC powered).

AT8801 single-channel 48V phantom power supply (AC powered).

One-Year Limited Warranty

Audio-Technica microphones and accessories purchased in the U.S.A. are warranted for one year from date of purchase by Audio-Technica U.S., Inc. (A.T.U.S.) to be free of defects in materials and workmanship. In event of such defect, product will be repaired promptly without charge or, at our option, replaced with a new product of equal or superior value if delivered to A.T.U.S. or an Authorized Service Center, prepaid, together with the sales slip or other proof of purchase date. Prior approval from A.T.U.S. is required for return. This warranty excludes defects due to normal wear, abuse, shipping damage, or failure to use product in accordance with instructions. This warranty is void in the event of unauthorized repair or modification.

For return approval and shipping information, contact the Service Depar tment, Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224.

Except to the extent precluded by applicable state law,

A.T.U.S. will have no liability for any consequential, incidental, or special damages; any warranty of mer- chantability or fitness for particular purpose expires when this warranty expires.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state.

Outside the U.S.A., please contact your local dealer for warranty details.

Audio-Technica U.S., Inc., 1221 Commerce Drive, Stow, Ohio 44224

Audio-Technica Limited, Old Lane, Leeds LS11 8AG England

Form No. 0320-0805-02-B/W © 1999 Audio-Technica U.S., Inc. Printed in U.S.A.