CHAPTER 8: Internet Direct Connection (IDC) Service

The following confirmation dialog appears when the download process is completed.

Tap to reboot the Disklavier and install the firmware.

Tap to install the firemware next time you turn on the Disklavier.

Tap to cancel the installation process.

4 Tap on the desired option ( or ).

Note: The installation process starts automatically when you reboot the Disklavier.

Note: Since the installation process starts when the Disklavier is rebooted, it may take longer than usual to operate the Disklavier after power up.

Note: You cannot cancel the installation process once it has started.

Setting Up the Disklavier for Internet Connection

You can change various settings related to the Internet connection. In most cases, you do not have to change the default factory settings.

You can access setup options by tapping on in the [Setup] screen.

English

[Use DHCP]:

Select the method to determine several addresses. If your router has DHCP server function, we recommend that you to select [DHCP] or [DHCP+DNS].

[DNS1]/[DNS2]:

Enter the address of the primary and secondary DNS server. These settings must be made when [Use DHCP] is set to [DHCP+DNS] or [MAN.].

Continue to next page...

90

Page 103
Image 103
Yamaha PRO/Mark IV manual Setting Up the Disklavier for Internet Connection, Tap on the desired option or, English Use Dhcp