Yamaha PRO/Mark IV Tap on to turn the video synchronization on, Pressvalue. select button to set

CHAPTER 4: Recording

3 Tap on to turn the video synchronization on.

Each time you tap on , the video synchronization turns on and off alternately.

4 Tap on the desired option ([Sync Level] or [Offset]), and then press to adjust its value.

To cancel the adjustment, press .

5 Pressvalue. (select button) to set the

Tip: The shortcut button on the [Song] screen

is also available. Tap on to turn on

video synchronization, and to turn it off.

Each time you tap on this button,

and alternates.

Note: Video synchronization does not function under the following conditions:

•While songs on SmartPianoSoft, PianoSoftPlusAudio, SmartKey, and audio CD are played back.

•While Vocal Harmony mode is activated.

In such cases, the icon is shown in gray.

Starting Video Synchronized Recording

1 Press repeatedly until the [Main]

screen appears, and then tap on in the [Main] screen.

2 Start recording on the camcorder.

3 Confirm that [Rec Wait] appears in the information area, and then press to start recording.

4 Wait for approximately ten seconds, and then start playing the Disklavier.

Note: This step is necessary for synchronization of the song and the video playback, and should not be omitted.

5 After playing the Disklavier, press to stop recording.

6 Stop recording on the camcorder.

English

46