Yamaha PRO/Mark IV Copying Song File from a Personal Computer to the Disklavier, For Windows

CHAPTER 2: Song Playback Features

Copying Song File from a Personal Computer to the Disklavier

You can copy song files from a Windows or Macintosh computer to a special folder on the Disklavier called [FromToPC] and then play them on the Disklavier.

Note: Copy-protected files, such as demonstration songs, cannot be copied to the [FromToPC] folder.

•Do not copy the files other than Disklavier song files.

1Connect the I/O Center to a LAN (local area network) to which a personal computer with a song file is also connected.

I/O Center (right side)

LAN

Personal computer

Note: It is necessary to configure the Disklavier properly for network communications by enabling it to get a DHCP IP address automatically (recommended) or by assigning an appropriate address manually. The procedure is the same as the one used for setting up the Disklavier for Internet communications. Please follow the instructions on page 90 for “Setting Up the Disklavier for Internet Connection.”

Note: For information about configuring a personal computer for network communications, please refer to the documentation that came with the computer.

For Windows

2 On the computer screen, click [Start] and then open [My Network Places].

3 Open [Dkv******] and confirm that the [FromToPC] folder is shown under that.

Note: [Dkv******] differs depending on the model.

Note: The folder or icon name differs depending on the version of your operating system.

4 Copy the desired song files to the [FromToPC] folder.

37