Yamaha PRO/Mark IV Resetting the Disklavier, Diagnosing the Disklavier, Tap on To start resetting

CHAPTER 6: Other Settings

	Resetting the Disklavier	To inactivate the ONE TOUCH button, select
		[No Function] in step 2.
If you want to return your Disklavier to its initial factory
settings, follow the procedure below.

1 Tap on in the [Main] screen,

and then on .

2 Tap on .

Tap to cancel resetting.

3 Tap on	to start resetting.
4 operation.Tap on	to complete the

Assigning a Specific Function to the ONE TOUCH Button

You can assign the ONE TOUCH button on the cradle a series of procedures for an often used function. The followings are the available functions.

[REC]: Sets the Disklavier in recording mode. (→ pg. 43)

[Performance]:

Turns on the Performance function. (→ pg. 39)

[Standby]: Turns off the Disklavier. (→ pg. 6 in “Quick Guide”)

Diagnosing the Disklavier

The piano diagnostics may be required as the occasion demands. In such a case, follow the instructions of your Yamaha dealer and perform the following procedure.

1 Tap on [Service Center] in the [PRC-100 Menu] screen.

2 Tap on the desired option, and then follow the instructions that appears on the screen.

3 Tap on to return to the [PRC-100 Menu] screen.

English

1 Tap on in the [Main] screen,

and then on .

2 Tap on [Function], press to select

the desired option, and then on

.

3 Tapoperation.on to complete the

68