CHAPTER 6: Other Settings

Hooking Up AV Equipment

If you connect the Disklavier to an audio system, you can hear the sound played/played back on the Disklavier from the connected audio system, and the sound played back on the connected audio system from the Disklavier.

AV amplifier, CD player, etc.

To audio

 

To audio

 

 

 

 

To digital audio

inputs

 

outputs

 

 

 

 

inputs

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Coaxial digital audio cord (not supplied)

RCA cord

(not

supplied)

DIGITAL

OUT

I/O Center

Setting Up the Disklavier for Audio Data Reception/ Transmission

You can select the kind of the incoming/going out audio signals. The following options should be set up in advance.

[OMNI IN]

Selects the appropriate option to match the incoming data input to the [OMNI IN] jacks.

[Audio]: Select this when you play back an audio software on the connected CD player, etc. and reproduce the sound from the Monitor speakers*.

[Analog MIDI-YM]:

Select this when you play back

PianoSoft·PlusAudio song.

Note: While this option is selected, you cannot adjust the [ONMI IN Vol] value, and Video Synchronized Playback and Vocal Harmony Mode is not available.

[OFF]: Select this when you cancel the data reception from the [OMNI IN] jacks.

[OMNI OUT]

Selects the desired data to be output from the [OMNI OUT] jacks.

[Output]: Select this when you output the same audio signals as the ones for the Monitor speakers*.

[Output+PianoTG]:

Select this when you output the ensemble part and the digital piano sound. (Note that the digital piano sound is also output in Acoustic mode.)

[PianoTG]: Select this when you output only the digital piano sound.

[OFF]: Select this when you cancel the data transmission from the [OMNI OUT] jacks.

63

Page 76
Image 76
Yamaha PRO/Mark IV manual Hooking Up AV Equipment, Analog MIDI-YM, Output+PianoTG