Yamaha PRO/Mark IV Video Synchronized Recording, Setting Up the Camcorder and the Disklavier

CHAPTER 4: Recording

3 Tap on , and then on

.

4 Tap on the desired part (,

, or ) to select its setting (to be recorded/overwritten).

Each time you tap on the part, its setting changes as follows showing the status with the color of the part icon:

Not record (white)/Not overwrite (green) ↔ Record/overwrite (red)

Tip: You can also overwrite the previously recorded part along with the blank part.

5 Press to start, and then immediately pause recording.

Video Synchronized

Recording

By recording a song played on the Disklavier synchronized with the video recording, later on, you can enjoy piano playback with the video. (→ pg. 36 “Video Synchronized Playback”) First set up the camcorder and the Disklavier, and then start recording by following the procedures below.

Setting Up the Camcorder and the Disklavier

1 Hook up a camcorder to the I/O Center.

To MIC/LINE input

RCA cord

(not To audio

supplied) Camcorder output

(L/R)

I/O Center

6 Confirm that [Recording] appears in the information area, and then start playing the Disklavier.

The Disklavier starts recording.

7 Press to stop recording, and then

tap on (to overwrite) or (to record as a new song) to complete the recording.

To cancel the recording, tap on .

2 Tap on in the [Main] screen,

and then .

For normal use, the adjustment of this option is not required.

Adjusts the length of the offset time that leads the actual playback of entire recording.

45