CHAPTER 8: Internet Direct Connection (IDC) Service

85

You can connect the Disklavier to a full-time online
Internet connection (ADSL, optical fiber, cable Internet,
etc.) via a router or a modem equipped with a router.

Preparations

To use the Internet connection, you will first need to
subscribe to an Internet service or provider.
Use a computer to obtain and configure Internet
service. You cannot obtain Internet service or
configure router settings on a local area network using
the Disklavier itself.
Before connecting the LAN cable, make sure to turn off
(or shut down) the Disklavier.

Connecting the I/O Center to the

Internet

Connection example 1:
Using a modem with router function
Connection example 2:
Using a modem without router function
Note: Depending on the contract with your Internet
provider, you may not be able to connect two or more
devices (for example, a computer and the Disklavier)
to the Internet. Please check your contract or contact
your Internet provider for further information.
Note: Some types of modems (such as ADSL
modems or cable modems) have multiple ports for
connecting two or more devices (such as computer,
musical instrument, etc.). If your modems have only
one port, an optional router or hub is required in order
to connect several devices simultaneously.
For further information on the Internet connection (only
a wired LAN connection is supported), visit the Yamaha
Disklavier website:
http://www.yamaha.com/disklavier/
(for US customers)
http://www.yamaha.ca/content/piano/products/
disklavierpianos/
(for Canadian customers)
http://www.yamaha-europe.com/yamaha_europe/
english_master/
(for European customers; Check the Disklavier website)
http://www.yamaha.com.au/au/
(for Australian customers; Check the Disklavier website)
Connecting the Disklavier to the Internet
Modem
(with router function)
I/O Center
(right side)
Other device
(such as computer)
LAN cable
Modem
(without router
function)
I/O Center
(right side)
Other device
(such as computer)
LAN cable
Router/hub