Audio2000's AKJ7002 Remote Control Commander, Descriptions and Functions, Remote control unit

REMOTE CONTROL COMMANDER

DESCRIPTIONS AND FUNCTIONS

A		B	2
1	INPUT
b		#	3
LOW	NATURAL	HIGH
-	MIC	+	4
	MASTER

VOLUME

+

MUSIC VOL	5
-

ACC7002-01

1. Operating range

The operating range of the remote control comm- ander is within a distance of about 16ft from the remote control sensor on the amplifier.

Do not point the transmitter on the front edge of the remote control commander to any other direction than the remote control sensor of the amplifier or leave an obstacle between the remote control commander and the amplifier.

Doing these may make remote control impossible.

INPUT INPUT

				t
			f
			6
		1
		t
		ou
		b
		A
		A
		b
-
VOM M		B
	LUASTEIC	#
+	MER
-		+
AC
C7
002
-01

Remote control unit

2.Loading batteries

The battery life is about 1 year under normal use, but it is recommended to replace the batteries when their power seems to be weak.

This remote control commander accepts two "AAA" batteries.

Remove the batteries if the remote control commander is not to be used for a long period of time.

1.INPUT A - Press this button to select the music source from input A.

2.INPUT B - Press this button to select the music source from input B.

3.KEY CONTROL BUTTONS ( b, ,#)

b:Lowers the music key one step (each step is ¼ note)

each time this button is pressed

: Press this button to reset the music key to its natural key.

#: Raises the music key one step (each step is ¼ note) each time this button is pressed

NOTE: The key will stay until it is changed further.

4.MIC MASTER VOLUME - These are the microphone master volume control buttons. Press the "+" button to raise the microphone master volume. Press the "-" button to lower the microphone master volume.

5.MUSIC MASTER VOLUME - These are the music master volume control buttons. Press the "+" button to raise the music master volume. Press the "-" button to lower the music master volume.

3.Battery handling precautions

Battery may explode or its fluid may leak if the batteries are handled in a wrong way. Take care of the following when handling the batteries.

Insert batteries with correct positive (+) and negative(-) polarities as indicated on the set.

Even batteries with the same shape sometimes have different voltages. Do not mix batteries with different types together.

Do not use new and old batteries together. When replacing batteries, be sure to replace both of them.

Do not heat, open or short-circuit a battery or dispose of it in fire.

Some batteries are rechargeable and some are not. Check the indication on each battery well.

1.Push the tab	2.Insert batteries with	3.Push the cover
and remove the	correct positive(+)and	close until it clicks.
battery cover.	negative(-)polarities.
	"AAA" batteries X 2

11